/Installations

Setting up Derby for the Interwoven Event SubSystem

Problem You are trying to setup Derby database for use with the Interwoven Event SubSystem. You have followed the installation instructions manual You get the following error in the eventsubd.log when starting the Event Subsytem: "Cannot create PoolableConnectionFactory". Potential Solution Check where the testdb database file has been created as the default in the Interwoven [...]

By |2009-01-10T04:52:19+01:00January 10th, 2009|Common Errors, Installations|0 Comments

Get OpenDeploy Version

When doing an upgrade of any Interwoven Software package, it is always handy to know what version you are upgrading from.  This will allow you to plan your upgrade path according to the current version installed.  Finding the exact OpenDeploy version can be quite tricky.  Below is a way to get the latest OpenDeploy version [...]

By |2008-12-10T14:44:41+01:00December 10th, 2008|Installations, OpenDeploy|0 Comments

Get TeamSite Version

When doing an upgrade of any Interwoven Software package, it is always handy to know what version you are upgrading from.  This will allow you to plan your upgrade path according to the current version installed.  Finding the exact TeamSite version can be quite tricky.  Below is a way to get the latest TeamSite version [...]

By |2008-12-09T17:35:41+01:00December 9th, 2008|Installations, TeamSite|0 Comments

Setting Environment Variables

Setting Environment path variables allows a user to input on command line a Interwoven command line tool rather than also entering the path and the name of the command line tool e.g. The TeamSite reset command is iwreset.  Without the environmental path variable set, the command on command prompt would be required to be inputted [...]

By |2008-12-05T16:59:13+01:00December 5th, 2008|Installations|0 Comments

Installation Tips

From my experience there are a few things to bear in mind when installing Interwoven Software.  These include Always install your software as administrator or full root (for solaris/Linux).  In respects to root access it must be full root not any sppof such as sudo. At the lease su root would be acceptable.  There have [...]

By |2008-12-03T17:54:32+01:00December 3rd, 2008|Installations, LiveSite, OpenDeploy, Search, TeamSite, UNIX|0 Comments

Configure TeamSite & Search on separate Servers

If you have TeamSite or Search installed on seperate servers, you are required to make configuration changes on both servers, so that they communicate with each other. On the TeamSite Server: Browse to iw-home/cssdk/cssdk.cfg. Edit the following entries (near the bottom of the file) according to your Search Server search.server.host: <Search Server Hostname> search.server.port: 6720 [...]

By |2008-12-02T18:08:57+01:00December 2nd, 2008|Installations, Search, TeamSite|0 Comments

OpenDeploy 6.2.0 working with LiveSite 3.0.2

I wrote a post recently regarding how to install LiveSite 3.0.2 with OpenDeploy 6.1.1 and TeamSite 6.7.1 SP1 http://www.littleforest.co.uk/articles/livesite302-installation/ This post expands on the post written above where by you get OpenDeploy 6.0.2 to work with LiveSite 3.0.2 and TeamSite 6.7.1 SP1. As long as you follow the process stated in the post above you [...]

By |2008-07-31T17:49:39+01:00July 31st, 2008|Installations, LiveSite, OpenDeploy|0 Comments

LiveSite 3.0.2 Installation procedure

If you have TeamSite 6.7.1 SP1 and wish to have LiveSite. You will need to install LiveSite 3.0.2 There are certain pre-reqs that need to be followed before doing the installation OpenDeploy must be installed on the server. This at present (25th July 08) can only be OpenDeploy 6.1.1 with the latest patch. NOTE: It [...]

By |2008-07-25T16:29:26+01:00July 25th, 2008|Installations, LiveSite|0 Comments

OpenDeploy Licensing Errors

If your experiencing trouble with OpenDeploy starting up and are seeing ‘ERROR: LicenseException: Bad host name’ errors in the OpenDeployNG/od.log file, this post will help resolve the issue. To get your domain name and host name, on the Command Line type: <Your OpenDeploy Home Directory>OpenDeployNGjrebin>java -cp <Your OpenDeploy Home Directory>opendeploynglibodng.jar com.interwoven.license.LicInfo -f <ODlic.log> -p OD [...]

By |2008-07-21T12:42:25+01:00July 21st, 2008|Common Errors, Installations, OpenDeploy|0 Comments